您好,欢迎来到三六零分类信息网!老站,搜索引擎当天收录,欢迎发信息
免费发信息
三六零分类信息网 > 广安分类信息网,免费分类信息发布

厂家供应耐磨试验机 UL1581试料磨平机 耐磨试验机价格

2023/7/18 8:17:28发布32次查看
xl-8015耐磨试验机ul规格试料磨平机 耐磨试验机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度,以供拉力、老化、耐油等试验之用
厂家供应耐磨试验机 ul1581试料磨平机 耐磨试验机价格 产品详情
xl-8015 耐磨试验机 ul规格试料磨平机 耐磨试验机在将橡胶或塑胶哑铃状试片磨平、磨薄或磨出所需之厚度,以供拉力、老化、耐油等试验之用。试片台左右、上下及前后可移动,以扳手操作。
符合ul1581标准第420.6条规定。
buffing machine (august 2, 2006 - ul 1581)
420.6 a power-driven buffing machine (grinding wheel) is appropriate for buffing irregularities from the ples from which die-cut specimens are to be prepared. the abrasive wheel is to be of about no. 36 grit (particle size of 0.019 inch or 0.486 mm). the wheel is to run true and is not to vibrate. the diameter of the wheel is not specified; however, 4-3/4 – 6-1/4 inch or 0.12 – 0.16 m has been found appropriate. the rotary velocity of the wheel is to be 2500 – 3500 r/min. the diameter and rotary velocity of the wheel are to be selected to give the wheel a peripheral speed (rpm×p×wheel diameter) of 3000 – 5000 ft/min or 15 – 25 m/s. caution – the maximum wheel diameter stated in this paragraph and the maximum wheel rpm stated in this paragraph shall not be used together as this combination will result in a peripheral speed above 5000 ft/min or 25 m/s. this applies even for wheels that are marked as being intended for a peripheral speed above 5000 ft/min or 25 m/s. the machine is to have a slow feed that applies light pressure and removes very little material at one cut, thereby not overheating the specimen or the wheel.
主要技术参数
砂 轮:36 ø 5″
砂轮线速度:3000~5000feet/min或15~25m/s
皮带轮加速比:2:1
体 积:50×60×40cm
重 量:50kg
电 源:1∮,ac220v 50hz
注:以上价格有误,仅供参考,来电更多优惠!
试料磨平机磨出一定厚度的片状,通过冲片机和哑铃刀制出哑铃试片,用于老化试验和拉伸试验。
下图为冲片机,冲切哑铃试片专用。
广安分类信息网,免费分类信息发布

VIP推荐

免费发布信息,免费发布B2B信息网站平台 - 三六零分类信息网 沪ICP备09012988号-2
企业名录